As a Buss Dev Management Clementi, its very critical for you to understand developing brand strategy is extremely critical. The most important asset your company has is its brand. Quite simply, it drives the direction of your business. So you should definitely have a well thought out brand strategy in place.
Increasing competition in business develops similar products with good quality from different manufacturers. But only an effective, innovative and Digitization Process & planning can make your business and products more popular.
For your profession as Buss Dev Management Clementi it becomes your responsibility to stay connected with like-minded supporting industry experts who can guide and help you deal with your day to day work issues.
Branding Strategy Essential For Strong Company Reputation
If you are entrepreneurial in nature owning a business is very exciting adventure. It can also be the most difficult thing for you to get into if you are not prepared.
The management of supply chains is constantly developing due to momentous changes such as the Internet, E-commerce and the globalisation of supply chains. Its success often relies on rapid, accurate and efficient handling of data. The trend towards lean and agile distribution channels and the growth of Fourth Party Logistic Providers (4PLs) within the supply chain industry requires significant organisation and management. The efficient control of these activities requires supply chain knowledge, operational information and importantly, timely and accurate data to support the decision making process. Essentially, effective and efficient data acquisition techniques are required.
RFID is a generic term for technologies that use radio waves to communicate the identity of individual items over an air interface. RFID works similarly to bar code technology in that an item has to be interrogated by a scanner or reader for it to be identified. Barcodes, however, have one significant downfall, they require line-of-site technology. That means the scanner has to see the barcode to read it, which usually means items have to be manually oriented towards the scanner for it to be read. Conversely, RFID does not require line-of-site and can be read as long as the item is within range of the reader.
RFID is now being considered as an integral link in E-Commerce environments. The technology in theory should enhance and complement Electronic Data Interchanges (EDIs) to facilitate quick response and the generation of exception reports. This should allow real time information to be transmitted to partners within the supply chain supporting the decision-making process. Ultimately RFID should provide immediacy of data right down to individual item level identification. This can help bridge the gap between the customer, the order and order fulfilment process to the satisfaction of the customer. This means that it can enable the enhanced responsiveness expected within an E-Business environment.
The supply of on-demand barcode label printers currently represents one of the most widely used AIDC technologies (technologies such as: barcodes, smart cards, magnetic stripes on credit cards, optical character recognition etc) in supply chain applications (e.g. EPOS, warehouse and inventory management). Due to mandates set by influential leaders in the retail and defence industries, barcode label printers with RFID enabled capabilities present a real opportunity for companies to develop and extend their product portfolios by providing products which will enable companies to meet compliance objectives. Opportunities also exist to provide printers for those companies faced with compliance for when usage and acceptance of the technology becomes more prevalent. An entire new market segment will have emerged, requiring a widespread ongoing supply of printers, peripheral equipment and consumables.
Bar code systems Bar code systems include the symbologies that encode data to be optically read, printing technologies that produce the machine-readable symbols and scanners and decoders that capture the visual images of the symbologies and convert them into computercompatible digital data. Barcode scanning reduces errors associated with manual data handling, and produces visibility to aid supply chain management. A significant benefit of bar codes is that they are extremely cheap to produce and provide an efficient means of item identification. Unfortunately, according to some sources, bar codes are proving increasingly inadequate in a growing number of applications. Bar coding is an optical technology, which introduces constraints regarding orientation of the product (invariably requiring human intervention) and cleanliness of labels and scanners for fast efficient data collection. Bar codes can be easily copied and so become an easy target for counterfeiting. In addition, standard barcodes have low storage capacity, cannot be reprogrammed and only identify the manufacturer and product and not the unique item. Industry bodies indicate that bar code systems are now a mature technology with limited potential for further growth.
RFID is emerging as a complementary technology to help overcome some of the drawbacks associated with bar code technology. RFID systems consist of transponders (tags), which are made up of a microchip with a coiled antenna and an interrogator (reader) with an antenna. The tags are attached to the items to be identified and the RFID readers communicate with the tags via electromagnetic waves. RFID middleware (software) provides the interface for communication between the interrogator and existing company databases and information management systems. RFID is a term used to describe any identification device that can be sensed at a distance by radio frequencies with few problems of obstruction and mis-orientation. The devices are often referred to as 'RFID tags' or 'Smart Labels'.
In its most basic form, a smart label consists of an ultra- thin RFID tag often referred to as an inlay. Inlays for smart labels are available in the 13.56 MHz, 860 to 930 MHz and 2.45 GHz frequency ranges. The inlays are embedded in label material, which is printed with human-readable text, graphics and bar codes (passive smart label). The printed data both supplements and backs up the information that is programmed into the tag. An evolutionary product to passive smart label technology is the smart active label (SAL). SALs can be defined using the same definition of smart labels above, but for one clear distinction, the inclusion of an integral power source. This distinguishing characteristic allows SALs to provide enhanced functionality over passive RFID smart labels including sensory, processing, display and locating capabilities. Smart labels are typically used for disposable applications and are not as durable as permanent RFID tags, which can be encased in materials to withstand harsh environments. Although one company suggests that the label material can be developed to withstand environmental conditions and that appropriate adhesive can ensure the label lasts the required duration.
Smart labels are referred to as smart because of their flexible capabilities provided by the RFID tag embedded in the label. The tag can be programmed and/or updated in the field allowing the same label to be reused serving multiple needs and disparate applications. Subsequently, the label is no longer static as a bar code label, but dynamic in its capability when equipped with RFID. Supporters of RFID suggest benefits which include: cost savings through automating the check-out process, a reduction in labour associated with performing inventory counts; improved theft prevention and increased authenticity control, a reduction in inventory holding cost, diversions and improved product availability. Unfortunately, an exact description of how the benefits are attainable in practice has often remained vague. The main criticisms on RFID technology are that it is too expensive and that it is unlikely that the investment will pay off. It is also argued that RFID is an over-marketed, hyped technology and that existing bar code based systems already provide most of the needed functionality.
Branding Strategies - When a Bargain-Brand Attacks a Premium-Brand
With the support of our professional business network, you get the opportunity to exchange experience and knowledge at a top professional level, and to strengthen and develop your own skills within your management and specialist areas.
Through business relationships and experience sharing in confidential settings for Buss Dev Management Clementi, we strive to create personal and business value for all our network peers.
In this article we're going to discuss the tricky aspect of marketing strategy when applying for a patent.
Getting a patent is a tricky process under normal circumstances. Under laws of the United States a company or person is entitled to a patent unless the invention was on sale in the country for more than one year prior to the application date of the patent. This applies to both sales and offers of sales. Therefore, companies conducting marketing campaigns must be careful not to destroy their patent rights. In a perfect world, application for a patent should be filed before any sales begin. But then that would hurt the company's bottom line because that ultimately puts profits on hold. In a competitive marketplace this could spell disaster for the company.
Therefore, it is important for a company to understand just what it is that starts the one year clock ticking. In other words what can they do and what can't they do in order to avoid their product being put on the timer?
In order to answer that question we have to understand what exactly, according to law, starts the clock running. There are basically two conditions. The first one is that the invention must be ready for patenting at the time of the sale. If it can be shown that the inventor had sufficient drawings that would enable another person to use the invention then this would satisfy the first criteria.
The second criteria is that there has actually been an offer for sale. In other words, the inventor or company that owns the invention approaches another company and offers to sell them the invention. This can either be in the form of a letter to the other company or in an actual physical meeting between the two companies. Usually the meeting follows a letter.
In the form of a letter the owner of the invention will usually draw up a letter stating that they have such and such an invention and go on to say that they feel this is something that would enhance their business. In the letter they would describe what the invention does and how it would help them. They would then ask the other company to get back to them if interested.
When it comes to the meeting the inventor will bring drawings of his invention and present them to the company interested in acquiring the invention. Maybe the inventor even has a working prototype he can show them. This is always a plus. Companies actually like to see that the invention they are interested in works.
Where the law comes in, and this is where inventors can delay the clock, is that the following items do not fall within the two criteria. Solicitation of customer pricing information from distributors and sales representatives; publication of preliminary data sheets and promotional information on invention features; communications to sales representatives; sales representatives providing customers with preliminary data sheets; and sales representatives' requests for customer samples.
Therefore, an inventor can engage in any of the above activities and NOT start the one year clock running. This allows the inventor to get as much preliminary leg work done for his patent without actually "technically" starting the process.
This is important information for any inventor to have if he is trying to gain as much ground in his quest for a patent as possible.
Networking has always been considered a powerful tool for improving business prospects, advancing a career, and developing ideas. Other than some brief, structured events, networking has been mostly informal and inexpensive in comparison to cost they otherwise spend on different channels. But membership is growing in many formal, long-term networking groups, and so is the price tag.
Our groups are not groups for generating sales leads, nor are they places where individuals can drop-in to gain quick advice on an immediate challenge. Members also sign a confidentiality agreement and benefits from the guided mentoring to help each other.
These groups include an experienced facilitator and use a structured discussion method to ensure appropriate participation.